industrial cybersecurity Archives - Robot Magazine https://www.robot-magazine.fr/en/tag/industrial-cybersecurity/ Toute l'actualité des robots connectés Fri, 22 May 2026 09:22:08 +0000 en-US hourly 1 https://www.robot-magazine.fr/wp-content/uploads/2025/06/cropped-cropped-logo-mag-d-32x32.png industrial cybersecurity Archives - Robot Magazine https://www.robot-magazine.fr/en/tag/industrial-cybersecurity/ 32 32 Humanoid Robotics: The real challenge is no longer the technology, but scaling up https://www.robot-magazine.fr/en/humanoid-robotics-the-real-challenge-is-no-longer-the-technology-but-scaling-up/?utm_source=rss&utm_medium=rss&utm_campaign=humanoid-robotics-the-real-challenge-is-no-longer-the-technology-but-scaling-up Tue, 14 Apr 2026 13:32:44 +0000 https://www.robot-magazine.fr/en/?p=6781 For years, humanoid robotics was seen as a purely technological challenge. Designing machines capable of walking, handling objects, or interacting with their environment was at the heart of innovation. In 2026, that paradigm has changed profoundly. The real bottleneck in the market no longer lies in robots’ mechanical or software capabilities, but in their large-scale …

Cet article Humanoid Robotics: The real challenge is no longer the technology, but scaling up est apparu en premier sur Robot Magazine.

]]> For years, humanoid robotics was seen as a purely technological challenge. Designing machines capable of walking, handling objects, or interacting with their environment was at the heart of innovation. In 2026, that paradigm has changed profoundly. The real bottleneck in the market no longer lies in robots’ mechanical or software capabilities, but in their large-scale deployment.

According to several industry estimates, the global humanoid robot market could reach between $30 billion and $60 billion by 2035, with annual growth exceeding 35%. Yet today, less than 1% of industrial companies use humanoids in real production environments. The gap between potential and adoption is telling.

From Technical Demonstration to Industrial Reality

Recent advances in robotics, driven by artificial intelligence and imitation learning, have made it possible to cross a major threshold. In 2025, several prototypes capable of performing picking or assembly tasks were unveiled. In 2026, some manufacturers are announcing tests involving fleets of 10 to 100 robots in controlled environments.

But those figures remain marginal. For comparison, a single automotive plant can deploy more than 1,000 traditional industrial robots.

The transition toward mass adoption involves challenges of a completely different nature:

  • System standardization
  • Large-scale maintenance
  • Software interoperability
  • Total cost of ownership (TCO)

Today, the cost of a humanoid robot still ranges between $50,000 and $150,000, which significantly limits large-scale deployment.

The real challenge is no longer
making a robot walk, but making
it work at scale.

 

Infrastructure: The New Battleground

Scaling up requires a complete rethink of the infrastructure surrounding humanoid robots. Unlike conventional industrial robots, these machines must operate in unstructured human environments.

This implies:

  • Ultra-reliable networks (5G / edge computing)
  • Latency below 10 milliseconds for certain critical applications
  • Real-time data processing capacity (several gigabytes per hour per robot)

According to a recent study, more than 70% of companies believe their current infrastructure is not ready to accommodate autonomous robots at scale.

Regulation: A Constraint, but Also a Lever

In 2025, several regions, particularly in Europe, began structuring regulatory frameworks around AI and robotics. These regulations impose:

  • Strict safety certifications
  • Traceability of algorithmic decisions
  • Data protection obligations

In sectors such as healthcare, certification timelines can reach 24 to 36 months, significantly slowing large-scale deployment.

However, by the 2028–2030 horizon, harmonized standards could accelerate adoption by creating a trusted framework for manufacturers.

Humanoid Robotics The real challenge is no longer the technology, but scaling up

From Hardware to the Service Layer

Historically, robotics was built around hardware. But since 2022, the market has been shifting toward service-oriented models.

The Robot-as-a-Service (RaaS) market is growing rapidly, at an estimated rate of more than 20% per year. Under this model, companies no longer pay for a robot upfront, but for its usage:

  • Average monthly cost: $2,000 to $5,000 per robot
  • Maintenance included in most offers
  • Continuous software updates

This approach reduces entry barriers and enables more gradual adoption.

Industrialization and Supply Chain: The Great Overlooked Issues

Producing a few dozen robots is one thing. Producing thousands is another.

By 2030, some players are targeting production capacities of 10,000 to 100,000 units per year. That requires:

  • Securing critical components (semiconductors, sensors)
  • Reducing production costs by 30% to 50%
  • Standardizing parts

Today, more than 60% of the cost of a humanoid robot is tied to its electronic components.

Market Integration: The Last Mile

Even if the technology is ready, one final obstacle remains: integration into real markets.

The first significant deployments are expected between 2026 and 2030, particularly in:

  • Logistics
  • Automated retail
  • Industrial assistance

Logistics alone could account for up to 40% of humanoid robot use cases by 2030, due to pressure on supply chains and labor shortages.

We are no longer selling machines,
but ecosystems where hardware is
only the visible part of the data layer.

 

A Redefinition of the Robotics Model

The traditional robotics framework is evolving toward a systemic approach. In 2026, the most advanced players are no longer selling robots alone, but complete solutions integrating:

  • Hardware
  • Software
  • Infrastructure
  • Services
  • Data

There is a clear convergence with SaaS models, where value shifts toward operations and data management.

Humanoid robotics is entering a new phase. After the era of technological innovation (2015–2025), the decade 2025–2035 will be defined by large-scale deployment.

The bottleneck has shifted toward infrastructure, regulation, and market integration. The companies that will dominate this market will not simply be those designing the most advanced robots, but those capable of deploying them at scale in real-world environments.

The next revolution will not be technological. It will be operational.

FAQ – The Challenges of Industrial-Scale Deployment

Although the global market could reach 30 to 60 billion dollars by 2035, less than 1% of industrial companies currently use humanoids. This delay is explained by the complexity of moving from tests on small fleets of 10 robots to massive deployments comparable to the thousands of traditional industrial robots already in place.

The unit cost of a humanoid robot, ranging between 50,000 and 150,000 dollars, remains a major hurdle for many companies. Added to this are challenges of standardization, software interoperability between different brands, and the need to establish industrial maintenance capable of managing large fleets.

Unlike fixed robots, humanoids move through unstructured environments and require ultra-reliable networks like 5G to ensure latency of less than 10 milliseconds. Processing several gigabytes of data per hour per robot requires a cutting-edge infrastructure that 70% of companies claim they do not yet possess.

The RaaS model allows companies to lease robots rather than buy them, with an average monthly cost between 2,000 and 5,000 dollars. This approach generally includes maintenance and continuous software updates, significantly lowering financial barriers to entry and facilitating gradual adoption by industrialists.

The implementation of strict regulatory frameworks, particularly in Europe, imposes rigorous safety certifications and algorithmic traceability. While these standards create a necessary climate of trust in the long term, they can slow down immediate deployment, with certification times reaching up to 36 months in sensitive sectors like healthcare.

Logistics is expected to represent about 40% of use cases by 2030 due to heavy pressure on supply chains and labor shortages. Automated retail and industrial assistance are also priority sectors where complete solutions integrating hardware, software, and data will provide immediate operational value.

 

Christophe Carle Louis -Robot Magazine Fr-EN

Contact Robot-Magazine.fr

 

Cet article Humanoid Robotics: The real challenge is no longer the technology, but scaling up est apparu en premier sur Robot Magazine.

]]> Rockwell, Schneider Electric, Beckhoff: the war of industrial architectures already has a temporary winner https://www.robot-magazine.fr/en/rockwell-schneider-beckhoff-the-war-of-industrial-architectures/?utm_source=rss&utm_medium=rss&utm_campaign=rockwell-schneider-beckhoff-the-war-of-industrial-architectures Tue, 07 Apr 2026 11:21:09 +0000 https://www.robot-magazine.fr/en/?p=6697 In the automation industry, market share battles rarely play out in public. They are fought in engineering offices, around specifications, when a machine builder chooses the controller for a new line. These decisions may seem technical, almost administrative. In reality, they are strategic, and they determine who will still be dominant ten years from now. …

Cet article Rockwell, Schneider Electric, Beckhoff: the war of industrial architectures already has a temporary winner est apparu en premier sur Robot Magazine.

]]> In the automation industry, market share battles rarely play out in public. They are fought in engineering offices, around specifications, when a machine builder chooses the controller for a new line. These decisions may seem technical, almost administrative. In reality, they are strategic, and they determine who will still be dominant ten years from now.

In 2026, this silent war has taken a turn that the industrial press has not yet clearly named. Beckhoff closed 2025 with €1.24 billion in revenue, up 6% in a contracting market. At the same time, Rockwell Automation was cutting 900 jobs, lowering its forecasts, and promising that the “tailwinds from AI” would become visible “quarter by quarter.” Schneider Electric, meanwhile, was quietly reinventing its control architecture with an announcement that went under many people’s radar: the industry’s first software-defined DCS, Foxboro SDA, launched in February 2026.

This is not a story about brands fighting each other. It is a story about architectures, and about a fundamental question that industry is putting back on the table: a dedicated controller on a proprietary backplane, or an open industrial PC that runs everything at once?

The proprietary architecture: why it worked so well for so long

To understand what is happening today, we need to understand what worked yesterday.

Rockwell Automation and its Allen-Bradley systems have built one of the strongest installed bases in industrial history, particularly in North America. ControlLogix is robust, reliable, well documented, and mastered by thousands of integrators and maintenance technicians. In large chemical, pharmaceutical and automotive plants, a Rockwell controller is often a non-negotiable requirement from the project owner, not a choice made by the integrator.

The strength of this installed base is real and lasting. Nobody replaces a healthy ControlLogix network just for the pleasure of adopting a more elegant architecture. The cost of migration, in time, training and operational risk, is prohibitive. Rockwell knows this, and this is precisely the rent on which it has built its profitability for the past two decades.

Schneider Electric has followed a similar logic, with one specific difference: a dual foothold in discrete and process industries, in Europe and emerging markets. Its Modicon catalogue for discrete automation, and Foxboro and Triconex for process and safety, give it a presence in sectors that Rockwell has never truly penetrated: petrochemicals, water treatment and energy infrastructure. It also has a distinctive position in energy efficiency, which has been part of its DNA long before it became a regulatory obligation.

Automation is no longer a
hardware choice, it is a
20-year strategy.

 

Beckhoff: how a “specialist” became a systemic threat

Beckhoff is not a startup. The German company, founded in 1980 and still owned by the Beckhoff family, has existed for more than 40 years. But for a long time, it was treated as a niche player by the giants of the sector: a choice for specialized machine builders, complex motion applications and environments where flexibility matters most.

That view has changed. And the figures confirm it.

Its success is based on an architectural bet made 30 years ago, which is proving increasingly right: an open industrial PC running TwinCAT in real time can do everything a dedicated controller does, and much more. A single processor simultaneously manages PLC logic, multi-axis motion control, vision, the EtherCAT communication bus, OPC UA connectivity and, now, artificial intelligence modules. No second PC. No second supplier. No additional integration layer.

EtherCAT, the communication protocol it developed and opened as an industrial standard, has become a global reference. Its synchronization precision on multi-axis architectures structurally exceeds what proprietary bus architectures such as Rockwell’s CIP Motion can offer at the same cost. This is a real advantage, measurable in microseconds, and it matters enormously when the machine becomes complex.

At Hannover Messe 2025, German Chancellor Olaf Scholz visited the Beckhoff stand at the opening of the trade fair, the most publicized protocol visit of the event. In 2026, Friedrich Merz typed a natural-language command into a TwinCAT station, and the AI integrated into the runtime returned functional logic on a giant screen. The symbol is not insignificant for a company that has never had the marketing budgets of its American competitors.

TwinCAT CoAgent: what the Hannover demo really says

At Hannover Messe 2026, Beckhoff presented TwinCAT CoAgent, an AI assistant integrated directly into the TwinCAT runtime, capable of translating natural-language instructions into machine commands, orchestrating motion sequences and assisting diagnostics. The flagship demonstration: a modular ATRO robot playing chess with visitors, entirely programmed by voice commands through the CoAgent.

The show was carefully staged. It needs to be viewed with discernment.

Generative AI capable of producing IEC 61131-3 logic that can be deployed in a real safety-critical machine, with a serious validation workflow, is not here today. Industry experts generally agree on a three- to seven-year horizon before this capability is mature enough for real industrial deployment. Anyone selling something else in 2026 is selling communication.

What is real, however, is something more subtle and more important: the fact that AI runs inside the TwinCAT runtime, on the same processor as the motion kernel and the EtherCAT master, in the same release cycle. Rockwell cannot deliver that with the same integration profile. Siemens comes close on the IDE side with TIA Portal, but less cleanly. The architectural difference is there, and it will become increasingly visible as industrial AI matures.

Schneider Electric: the strategic move that almost nobody noticed

While Rockwell and Beckhoff were occupying the stage, Schneider Electric did something important in February 2026: it launched Foxboro SDA, presented as the industry’s first software-defined DCS.

The stakes are considerable for the process industry. DCS systems distributed control systems used in refineries, chemical plants and power stations have historically been among the most proprietary systems, the most expensive to maintain and the hardest to evolve. A DCS installed in 2005 may still be operating in 2035, with technological debt amounting to millions of euros in maintenance and upgrades.

Foxboro SDA decouples software from hardware. This means an industrial company can evolve its control logic without replacing its physical infrastructure, migrate to cloud or edge functions without starting over, and integrate new AI capabilities without changing suppliers. This is exactly what the process industry has been asking for for years, and what nobody had yet delivered in this form.

The EcoStruxure Automation Expert layer that drives it is based on UniversalAutomation.Org, an open foundation similar to what the OPC Foundation did for data interoperability. The stated objective is to reduce dependence on a specific supplier. In an industry built on lock-in, this language of openness is either a genuine paradigm shift or a marketing promise. The next few years will decide.

What is certain is that Schneider Electric is playing a different game from Rockwell and Beckhoff. Its preferred territory remains process, energy and infrastructure. Its proposition in the discrete market is less powerful. But on its own ground, this announcement is a structural move.

In Industry 4.0, software is
the new master of the
forge.

 

The real question: who specifies new lines in 2026?

The heart of the debate is not technical. It is demographic and economic.

A seasoned industrial analyst put it bluntly in a specialist newsletter that circulated in May 2026: the engineers who specified Allen-Bradley in 2002 and 2010 are retiring. Those specifying new lines in 2026 are in their thirties. Their first contact with PLC programming was not a classroom course in a panel shop, but an open-source simulator on a laptop. They have a natural affinity for open environments, modern IDEs and architectures that feel like software development.

No marketing budget can compensate for a generational shift. Rockwell has an extremely loyal installed base, but its share of new greenfield lines has already been moving unfavorably for several years.

This does not mean Rockwell will collapse in the short term. Maintenance of the installed base, renewals, brownfield projects in plants with 20 years of ControlLogix behind them all of this represents a solid foundation for another 10 to 15 years. But the trajectory on new installations is concerning, and Rockwell’s product response FactoryTalk Optix as a visualization and connectivity layer does not change the underlying architecture. It is a surface adaptation on a proprietary foundation that has not fundamentally evolved.

Where each player still wins, and where each is losing ground

Rockwell remains essential in North American brownfield environments. Large plants with 20 years of ControlLogix will not change architecture over the next decade, whatever the competitive pressure. Sectors with strong regulatory inertia, such as chemicals, high-risk process industries and functional safety, also remain favorable ground. The depth of the Allen-Bradley integrator network in North America is an advantage Beckhoff has not yet reproduced at that scale.

Schneider Electric holds its ground in global process industries. Foxboro and Triconex are references in petrochemicals and functional safety. The Foxboro SDA announcement strengthens this position by adding a modernization layer that did not previously exist. In terms of energy efficiency, an increasingly decisive criterion in industrial specifications, Schneider has a positioning that its competitors have not managed to replicate as completely.

Beckhoff is winning in greenfield discrete automation, motion-intensive systems and vision-integrated machines. Machine builders selling in Europe and Asia on the same specifications one runtime, rationalized SKUs, a coherent architecture have a clear economic argument for TwinCAT and EtherCAT. And the fact that AI can be integrated natively into the runtime, without third-party infrastructure, is starting to weigh in comparisons.

What this battle says about automation in 2026

The “war of architectures” is not a trade-show headline. It is an industrial reality playing out today in every new greenfield project, every machine-builder specification and every runtime choice inside an engineering office.

What is being decided is whether the controller of the future looks like a specialized electronic device, proprietary by nature, or like an open industrial computer capable of hosting any function the machine requires, including AI models directly in the control loop.

The history of computing has already answered this question once, in the 1990s, when proprietary servers gave way to x86 architecture servers. It would be reckless to claim that automation will follow exactly the same path. Real-time constraints, functional safety and industrial reliability are different. But the direction of travel is readable.

Rockwell, Schneider and Beckhoff are each responding in their own way. None of the three will disappear over the next 10 years. But in 10 years’ time, the order of the podium for new installations will probably not look the same as it does today.

Robot Magazine follows developments in the industrial automation market. Are you an integrator, machine builder or technical manager? Your field experience is the most valuable source. Share it in the comments.

Author: Christophe Carl Louis
Content enriched with artificial intelligence tools.

FAQ – The Keys to Industrial Automation and IoT

Rockwell Automation focuses heavily on vertical integration through Studio 5000 and the EtherNet/IP protocol, offering a highly consistent user experience. Schneider Electric, on the other hand, emphasizes openness through its EcoStruxure platform, which facilitates convergence between energy management and industrial automation for greater long-term efficiency.

Beckhoff stands out through its PC-based control philosophy. By using TwinCAT software and the ultra-fast EtherCAT protocol, this solution makes it possible to run highly complex Motion Control tasks on standard computing hardware, where others would require dedicated processors.

EtherCAT is considered one of the most powerful protocols for Motion Control because of its “on-the-fly” processing method. This communication speed enables perfect synchronization of multiple robotic axes down to the microsecond, ensuring unmatched precision and production speed.

With the rise of industrial IoT, PLCs are no longer isolated but connected to global networks. This connectivity exposes critical infrastructure to digital threats, making it essential to implement robust protection barriers to prevent sabotage or industrial espionage.

Digital transformation makes it possible to move from reactive maintenance to predictive maintenance. Thanks to smart sensors and data analysis, the system can anticipate a component failure before it happens, drastically reducing costly downtime.

Interoperability is now possible thanks to universal standards such as OPC UA. This technology acts like a universal translator, allowing a Rockwell controller to communicate with a Schneider solution or a Beckhoff system, thereby creating a hybrid and flexible industrial architecture.

 

Christophe Carle Louis -Robot Magazine Fr-EN

Contact Robot-Magazine.fr

 

Cet article Rockwell, Schneider Electric, Beckhoff: the war of industrial architectures already has a temporary winner est apparu en premier sur Robot Magazine.

]]> Standards, Safety and Regulation: Why the European Model Is Becoming a Global Reference in Robotics https://www.robot-magazine.fr/en/standards-safety-and-regulation-why-the-european-model-is-becoming-a-global-reference-in-robotics/?utm_source=rss&utm_medium=rss&utm_campaign=standards-safety-and-regulation-why-the-european-model-is-becoming-a-global-reference-in-robotics Wed, 28 Jan 2026 04:22:29 +0000 https://www.robot-magazine.fr/?p=6045 In a global robotics market accelerating at full speed, Europe stands out with an approach often criticized but increasingly admired: strict standards, high safety requirements, and proactive regulation. Far from hindering innovation, this model could well become a global benchmark, including for American and Chinese players. Safety as an Industrial Foundation European industry has been …

Cet article Standards, Safety and Regulation: Why the European Model Is Becoming a Global Reference in Robotics est apparu en premier sur Robot Magazine.

]]> In a global robotics market accelerating at full speed, Europe stands out with an approach often criticized but increasingly admired: strict standards, high safety requirements, and proactive regulation. Far from hindering innovation, this model could well become a global benchmark, including for American and Chinese players.

Safety as an Industrial Foundation

European industry has been built around a core principle: machines must adapt to humans not the other way around.

Standards promoted in particular by the International Organization for Standardization (ISO) have enabled the rise of collaborative robots, secure cells, and advanced control systems.

The results:

  • Stronger social acceptance

  • Reduced legal risks

  • Better integration into existing industrial sites

 

In robotics, Europe has made a
strategic choice: prioritizing safety
and trust over speed at all costs.

 

European Regulation: A Barrier… That Protects

European regulation acts as a quality filter. It imposes high requirements in terms of functional safety, liability, and traceability.

In the short term, this can slow down certain deployments. In the long term, it creates a structural advantage for players capable of complying with these standards.

European industrial companies know that a solution certified today will be exportable tomorrow, without major regulatory reassessment.

In Europe, for example, CE marking forms the regulatory foundation for placing any robot on the market whether industrial, collaborative, or humanoid. It certifies that the manufacturer has carried out a comprehensive risk assessment, that the machine meets essential requirements for safety, health, and personal protection, and that it complies with harmonized European standards.

With the entry into force of the EU Machinery Regulation 2023/1230, the CE framework is evolving to better integrate autonomous robots, connected systems, and embedded AI, strengthening requirements related to functional safety, cybersecurity, and traceability. In a context of growing robot deployment in open environments, CE marking is becoming a key factor of trust and industrial acceptability far beyond a simple administrative obligation.

What the United States and China Can Learn

The United States excels in innovation speed and software scalability.
China masters industrial capacity, cost reduction, and rapid scaling.

However, both models are now facing limitations:

  • Social acceptability

  • Liability in the event of incidents

  • Deployment in sensitive environments

The European model offers a complementary answer: trust as an industrial asset.

The next robotics revolution will
not be purely technological it will
be regulatory and societal.

 

Towards a Convergence of Models

Rather than competing approaches, global robotics may evolve toward cooperation between models:

  • The United States brings software innovation and AI

  • China brings industrial capacity and speed

  • Europe brings standards, safety, and governance

This convergence is essential to deploy robotic systems at scale in complex and highly regulated environments.

Robotics is entering a phase of maturity. In this context, trust is becoming as strategic as performance. By placing standards, safety, and regulation at the heart of its approach, Europe is not slowing the market it is preparing its global sustainability. The United States and China would be well advised to draw inspiration from this model and build alongside it.

FAQ – Why Is the European Robotics Model Becoming a Global Reference?

While often perceived as restrictive, strict standards do not hinder innovation. Instead, they push manufacturers to develop more robust, reliable, and sustainable solutions. Over time, this creates a framework of trust that accelerates adoption and facilitates international market access.

European regulation acts as a quality filter by enforcing high requirements for functional safety, responsibility, and traceability. Although some deployments may be slower in the short term, compliant solutions gain a long-term structural advantage by being easier to scale and export globally.

CE marking confirms that a robot meets essential safety, health, and human protection requirements. With the introduction of the EU Machinery Regulation 2023/1230, the CE framework now better addresses autonomous robots, connected systems, and embedded AI, strengthening requirements for functional safety, cybersecurity, and traceability. As robots increasingly operate in open environments, CE marking has become a critical trust enabler rather than a simple administrative step.

The United States excels in rapid innovation and software scalability, while China dominates industrial capacity, cost optimization, and fast volume production. However, both models face growing challenges related to social acceptance, liability in case of incidents, and deployment in sensitive or highly regulated environments.

The European model positions trust as a strategic industrial asset. Through strong standards and governance, it secures real-world use cases, reassures end users, and provides a common foundation for international collaboration and long-term deployment.

Robotics is entering a maturity phase where trust is as critical as performance. A convergence of models is emerging, combining US leadership in software and AI, China’s industrial speed and scale, and Europe’s expertise in safety, standards, and regulation to enable sustainable, large-scale robotic deployment worldwide.

 

Christophe Carle Louis -Robot Magazine Fr-EN

Contact Robot-Magazine.fr

 

Cet article Standards, Safety and Regulation: Why the European Model Is Becoming a Global Reference in Robotics est apparu en premier sur Robot Magazine.

]]>